Full Range, 2-Way Stereo Panel (Single)
The Stealth Acoustics model SLR8G is a dual channel, full-range speaker system that is most popularly used with dispersed audio systems since it can play both stereo channels as a single panel. The SLR8G has a rigid frame that attaches directly to standard structural framing becomes completely invisible after installation. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.
The SLR8G incorporates an acoustically coupled high quality, high-power 8” cone woofer and two directly coupled 25 mm neo-magnet high-frequency motors. Advanced internal carbon fiber materials allow for smooth frequency extension to 20 kHz. When the SLR8G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45 Hz can be achieved. The SLR8G contains independent crossover sections and protection circuits (high-frequency and low-frequency sections) for each channel that automatically reset upon reduction of excessive amplifier power. This robust speaker is designed to last as long as your home does.
The SLR8G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.
Recommended Uses
Distributed Audio
Cinema Surround
Sound Masking
Best for in-wall or in-ceiling installations
Downloads
Specification Sheet: Download PDF
User Manual & Installation Guide: Download PDF,
Quick Start Installation Guide: Download PDF
View Instructions & Video
Dimensional Drawings: Download PDF
Test Results: Download PDF
LineaResponse Brochure: Download PDF
Specifications
Frequency Response:
45Hz to 20kHz
Power Capacity:
120 watts RMS
60 watts minimum
recommended power
Protection:
Two independent self-resetting
devices (low and high frequency)
Sensitivity:
82 dB (1 watt / 1 meter)
System Impedance:
8Ω nominal
Driver Components:
High frequency:
Two 1-1/8” (30 mm) neodymium motor
Low-frequency:
1-1/2” (38 mm) voice coil, 8” (203 mm) woofer
Ceramic 20 oz. (567 gr) magnet
Polar Dispersion:
170 degrees vertical and horizontal
Dimensions:
Width: 15-7/8” (403 mm)
Height: 22″ (559 mm)
Mounting Depth:
2-1/2” (64 mm)
Product Weight:
14.5 lbs. (6.6 kg) each
Shipping Weight:
18 lbs. (8.1 kg) per single
Included Accessories:
Mounting shims
Shim tape
Mounting screws
Terminal wrench
